HOME PRODUCT Lightning Protection Intelligent Equipment RY-LC-NB/SIR NB-IoT Lightning Monitoring Device

PRODUCT

RY-LC-NB/SIR NB-IoT Lightning Monitoring Device
RY-LC-NB/SIR NB-IoT Lightning Monitoring Device RY-LC-NB/SIR NB-IoT Lightning Monitoring Device RY-LC-NB/SIR NB-IoT Lightning Monitoring Device

RY-LC-NB/SIR NB-IoT Lightning Monitoring Device

Product Attributes :

1. RY-LC-NB/SIR lightning monitoring device realizes online monitoring of lightning current peak value, lightning polarity, lightning waveform T1/T2 time, SPD lightning strike times and built-in ambient temperature & humidity. It supports NB-IoT wireless transmission and RS485 Modbus RTU interface for IoT system integration.

2. Equipped with 0.96-inch OLED local display and page-turning inductive button. Solar-powered waterproof outer housing, small dimension for easy installation on lightning down-conductors. It supports platform alarm notification via SMS and historical data statistical analysis.

3. Monitoring range of lightning current peak is ±1-250kA, trigger action current ≥1kA. It is suitable for lightning strike data collection of lightning rods, SPD and grounding down-wires in various outdoor lightning-protection projects.

 

Product Description

Working Principle

1. The lightning current acquisition coil is sleeved onto grounding down-conductor. The device induces lightning surge signal to capture lightning strike time, peak current, polarity and waveform T1/T2 parameters.

2. Built-in sensor collects ambient temperature and humidity data. When humidity exceeds 95% RH and lasts more than 15 minutes, alarm event will be generated.

3. Collected data can be displayed locally on OLED screen, transmitted to IoT cloud platform via NB-IoT, or output through RS485 Modbus RTU for upper computer reading. The platform sends SMS alarm notification when abnormal status occurs.
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (1)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (2)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (3)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (4)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (5)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (6)

Product Features

1. Multi-dimensional lightning data acquisition: record lightning occurrence time, peak current, polarity, T1 & T2 waveform parameters and SPD strike count. 
2. Built-in temperature-humidity monitoring function with over-humidity alarm trigger condition. 
3. 0.96-inch 128*64 OLED local display; inductive page-flip button for screen wake-up and data browsing. 
4. Dual communication: NB-IoT for cloud remote monitoring, RS485 Modbus RTU for local system integration. Power indicator and communication status indicator lights.
5. Solar-powered waterproof enclosure; support SMS alarm push and cloud-side historical-data statistics & report generation.
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (2)

Technical Parameters

1. Model: RY-LC-NB/SIR 
2. Power supply: DC12V, power consumption<2W 
3. Lightning strike trigger action current: ≥1kA 
4. Lightning current peak monitoring range: ±(1-250) kA, resolution:0.1kA 5.Measurement accuracy: ±(1-2kA) ±20%; ±(2-200kA) ±10% 
5. Temp-humidity: built-in sensor; optional external-probe range:-40℃~120℃, 0-100% RH 
6. RS485: Modbus RTU protocol, default address 02, baud rate 9600, 1 stop bit, no parity
7. Installation: 35 mm DIN rail mounting; dimension:1106258.5 mm 
8. Protection grade: IP20; flame-retardant rating UL94 V0; applicable altitude ≤2000 m
9. Terminal: 10-pin wiring terminal
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (1)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (2)
RY-LC-NBSIR NB-IoT Lightning Monitoring Device (3)

Application & Installation

1. Application scenarios: lightning-data online monitoring for lightning rods, SPD surge protectors and grounding down-conductors of power, communication, meteorology and petrochemical projects.

2. Installation requirement: mount device near lightning down-conductor or SPD grounding wire, place main module inside waterproof box with 12VDC power supply.

3. Wiring steps: connect positive/negative power terminals to 12VDC power source; connect lightning-current-coil LS and GND terminals to device port 3-4; pass grounding wire through coil center hole and pay attention to current direction of the coil.

4. Local operation: wake screen and browse data via inductive page-turn button. Remote access: log in Nanrui IoT platform to check device status, historical records and receive SMS alarm messages.

5. RS485 debugging: connect with computer, read data with Modbus software according to official communication protocol document.
Online Inquiry